L-Acoustics - LA7.16i CE
SKU: APLA3202
L-Acoustics - LA7.16i
CE version.
LA7.16i is a 16-channel amplified controller dedicated to permanent installations. It integrates L-SMART power management technology to dynamically match the real-time needs of the loudspeaker system being driven. LA7.16i is efficiently dimensioned for multichannel applications, distributed systems, or line sources for the finest discretization.
Its streamlined and elegant 2U chassis hides a powerful DSP engine with features for loudspeaker management, system protection, and monitoring as well as a comprehensive set of tools for system adjustment and calibration. The Milan-compliant LA7.16i supports AVB inputs with seamless network redundancy, in addition to AES/EBU and analog connections. Three GPIO and a 24 V DC backup power for the DSP card offer external control and increased reliability.
Amplification and power supply
Amplification class
High-efficiency class D
Output power, all channels loaded
16 x 1100 W at 4 ohms
16 x 1300 W at 8 ohms
16 x 700 W at 16 ohms
Nominal power requirements
16 A (200-240 V) 30 A (100-120 V)
Mains connector
32 A powerCON
Power supply model
Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Mains rating
100 V - 240 V ±10%, 50-60 Hz
External DSP backup voltage input
24 V DC
DSP
Digital Signal Processor (DSP)
Gen.5 Dual SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing
16 x 16 routing and summation matrix
Per output channel
Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters
Array morphing (LF contour, zoom factor), Air absorption compensation filters
Internal IIR and FIR EQ algorithms for speaker phase linearization and improved impulse responses
Output delay from 0 to 1000 ms
Technologies
Loudspeaker management
L-DRIVE advanced system protection
Amplifier management
L-SMART adaptative power management
Latency
Standard latency (analog/digital inputs)
3.84 ms
Low latency (analog/digital inputs)
1.18 ms
Inputs
AVB
16 channels from up to 16 streams (of up to 8 channels each)
AES/EBU
2 channels AES/EBU (1 x AES3) with SRC
Analog
1 channel analog
Connections
2 etherCON 1 Gb/s I/O+ control 1 male 12-point terminal block (AES3 or Ana input/link + GPIO)
Outputs
Loudspeaker connections
8 Female 4 point terminal blocks
Circuits protection
Mains and power supply
Over and under voltage / over temperature / overcurrent
Power outputs
Overcurrent / DC / short circuit / over temperature
Interface
Display/indicators
LED's only
Remote control and monitoring
L-Acoustics remote control software
LA Network Manager
General purpose inputs and outputs (GPIO)
3 in/out on 12 point terminal block
Third-party management solutions
QSC® Q-SYS / Crestron®
Operating conditions
Temperature
-5º C / 23º F to +50º C / 122º F
Physical data
Height
2U
Weight
14.5 kg / 32 lb
| Brand | L-Acoustics |
|---|
